DIY Lightbox for Product Photography

I’ve read all sorts of tutorials and how-to instructions for making a homemade lightbox for photographing things… and I’ve tried a couple of them.

The cut-up-a-cardboard-box-and-line-it-with-tissue paper thing didn’t work out for me. It felt flimsy and didn’t even yield decent pictures (for me, at least).

Then I combined some different thing I have read, seen, and heard about, and came up with a pretty decent solution to my macro photography woes.

You will need:

• one of those milky white/clear storage containers, like Rubbermaid or Tupperware or whoever makes them
• several clip-on lights. You can use what you have, or buy inexpensive ones from Lowe’s or Home Depot. Make sure you get some that will handle the watts of the bulbs you wish to use. We don’t want to start a fire!
• Stuff to clip the lamps onto.
• A power strip to plug all of the lamps into.
• Light bulbs. I’m using full-spectrum “GE Reveal” halogen bulbs. They have a halogen bulb within the regular outer bulb, which is nice because you don’t have to worry about getting your fingers’ oil on the halogen part and making it explode.
• Some sort of background material. I bought a white poster board and a black poster board.
• White fabric for diffusing the light.

These are the lamps I got. I think they were 7 dollars each. There was a smaller size for 6 dollars too.

My light bulbs. Like I said before, they have a halogen bulb inside the regular glass bulb. Very cool.

I’m clipping my lights onto random things, propped up by other random things… it really doesn’t matter because those aren’t ever in the photos (unless you’re writing a tutorial on how to make a light box). The containers kept falling over, until I stuck some weights in them. Now they’re good to go.

This may seem like common sense, but plug all of your lamps into a power strip. The awesome part is you can leave all of the lamp switches on, and just use the power strip’s switch to turn them all on and off at once. It’s a little thing, but very cool.

Here’s my general set-up so far. The box is on its side with the background material in it, and lights clipped all around it (and one on top). I guess you can tell I’m not using my tripod, because it’s over there on the left looking lonely.

Make sure your white balance is set to the correct setting (for my box that’s usually the tungsten setting… or I’ll do the manual setting, in which you just point the camera at the background, click, and then it’s set!) That will take a pretty good picture, but there will be some glare. This photo is unedited.

If you want to reduce the glare, take a piece of fabric…

And drape it over the lightbox, between the lights and your product. I just kind of threw it on top, but if I were feeling perfectionistic, I would smooth everything out. I’m still obviously not using my little tripod, as you can see it in that picture, looking sad.

That’ll give you a less glare-y photo, but slightly darker.

Which can easily be fixed by playing with levels in any photo editing program.

It may not be perfect, but it’s way better than what I had before (stick the product on a background and try tons of angles and light sources to try to get it to be well-lit and good-looking).

Works for me!

I took all of my stationery photos using the light box, too. Very helpful, and I’m happy with the results!